Work done so far:
- Remove front forks, clean up and re-grease head bearings.
- Remove side stand and pegs, clean up and paint. Need to find a new bolt for side stand though as I broke the bolt removing it.
- Stripped down handle bars
- Removed air filter box and found there is no foam air filter as their should be!
- Removed exhaust and found huge rust patch underneath although its not holed. Gave it a polish to see what it looks like
The next few jobs:
- More cleaning of plastic parts, such as front mudguard and white plastic leg shield (needs repairs)
- Remove tape from seat and remove seat cover. Strip it down an dmake pattern for new seat cover.
- Check and clean brakes in front wheel so it can be put back into the forks.
- Rub down and paint wheel spokes silver as they look solid and undamaged. Clean and polish wheel rims, check tyres
- Remove, strip and clean carb.
- Move on to engine, drive and rear wheel and brakes.