Pages

Project T80 Update 4

Just a minor update, the rear wheel is off. Spotted a hole in the lower part of the wheel arch that joins to the frame. Not a good sign so will have to be patched and welded up. I had felt this on the inside while te petrol tank was removed but wasn’t sure if it was into a box section or directly through to te outside. Due to its position it is likely that water and road dirt will enter if its not patched up and strengthened. I’ve made up a card template and cut some sheet steel to fit. Time to get out the angle grinder and welder.

I tried to remove the swingarm but the bolt doesn’t seem to want to move. I don’t want to round off the head so I May just leave it as it is. I’ll clean it up and paint it later. There doesn’t appear to be any movement so the bushes are ok.

Bookmark this post: bookmark bookmark bookmark bookmark bookmark bookmark bookmark bookmark bookmark bookmark

Comments are closed.